4-Bottle Wooden Wine Box with High Gloss Lacquer Finish
This is a four-bottle wooden box for buyers who need a wine gift that survives shipping without looking like a shipping box. The lacquer gives it a mirror finish. Velvet-covered EVA foam holds each bottle at four points. Nothing rattles. Gold-tone handle and latch keep it easy to carry and secure. It suits wine clubs, corporate gifting, and retail sets where the box is part of the presentation. If you need a shipper that gets thrown away, this isn't it. If you need a box that gets kept on a shelf, it's worth a look.
- High-gloss lacquer finish. Multi-layer piano paint gives a mirror-like shine and better scratch resistance than a standard wood finish. It holds up to handling and still looks clean when the box arrives.
- Velvet-covered EVA foam insert. High-density foam keeps each bottle firmly in place. The velvet facing protects the label and shoulder from scuffing during transport.
- Gold-tone hardware. A metal handle and secure latch make the box easy to carry and keep it closed in transit. The latch isn't decorative. It holds the lid down when the box is stacked or jostled.
- Four-bottle capacity. Sized for four standard wine bottles in a compact form. The insert is cut to the bottle profile, so there's no empty space for the neck to flex.
- Laser-engraved branding. Gold foil logo and design elements can be added to the lid or front panel. This is a box that gets kept, so the branding has a long shelf life.
Specifications
- Category
- Wooden wine box
- Bottles
- 4
- Premium Wood Material
- Durable, fine-grain wood that ensures strength and a sophisticated look.
- High-Gloss Lacquer Finish
- Multi-layer polished piano paint provides a mirror-like shine and superior scratch resistance.
- Custom-Molded Foam Inserts
- High-density EVA foam covered in soft velvet keeps bottles firmly in place, protecting them during transport.
- Spacious Design
- Accommodates up to four standard wine bottles in a compact, easy-to-carry form.
Customisation
You can change the wood species, lacquer color, foam density, velvet color, and hardware finish. The insert is cut to your exact bottle profile. Any standard bottle shape works. Logo placement is flexible: laser-engraved on the lid, gold foil on the front, or both. We work from your dimensions or a bottle sample. You get a blank sample to check the structure before we run the printed version.
How the box is built
Fine-grain wood forms the body. Then a multi-layer lacquer goes on. That's what gives the box its stiffness and the mirror-like surface. The wood is dense enough that the corners stay square. And the lacquer is polished rather than sprayed on thin. Run a thumb over the edge and you'll feel the difference.
The hardware is gold-tone metal. A handle on top. A latch on the front. The latch is mounted so it pulls the lid down evenly. That matters when the box is packed tight and shipped. The hinge is simple, but it's sized for the lid weight. It won't sag after a few opens.
How the bottles sit
Each bottle sits in a custom-molded EVA foam cavity lined with velvet. The foam is cut to the bottle shape. So the bottle contacts the insert at the base, body, shoulder, and neck. Four points of support. That's our rule for a secure fit. No unsupported neck or shoulder. We test every insert design with a shake for 10 seconds, a 45-degree tilt, and an inversion. If the bottle moves, slides, or releases, the insert gets recut. Our control tolerance on inserts is plus or minus 1 mm. The cavity is not loose. The velvet lining prevents label scuffing when the bottle is pulled in and out.
Where it gets used
Wine clubs use this for a quarterly four-bottle selection. Corporate gift programs use it for client gifts. Retail stores sell a set of four wines as a single gift in it. Premium wine launches use it when the box stays on a desk or shelf after the bottles are gone. It's the wrong choice for high-volume e-commerce where the box is discarded on arrival. If your buyer throws the packaging away, a corrugated shipper costs less and does the same job. This box is for when the packaging is part of the product.
Buyer questions
Will this box survive shipping without the bottles moving?
The insert is custom-molded EVA foam lined with velvet. We test every design with a 10-second shake, a 45-degree tilt, and an inversion. If the bottle moves, slides, or releases, we recut the insert. Our control tolerance is plus or minus 1 mm. The fit is snug.
Can I get this box with a different number of bottles?
Yes, this is a four-bottle design. We can adjust the insert and box dimensions for one, two, three, or six bottles. Send us your bottle dimensions or a sample. We'll build the structure around it.
How is the logo applied to the wooden surface?
We use laser engraving and gold foil stamping. Laser engraving gives a recessed mark that won't rub off. Gold foil adds a metallic finish. Both can be placed on the lid or front panel. We can combine them for a layered look.
Related products
Quote this box
Tell us your bottle, quantity and artwork stage. We reply with structure options, sample plan and pricing.
- Email[email protected]