Premium Orange Leather Double Wine Bottle Gift Box

It's a two-bottle gift box that ships inside an outer carton. Not a bulk shipping carton, okay? Instead it has dedicated compartments for two standard 750ml bottles and a strap. Textured orange leather with black trim and a metal latch, which makes for a premium feel. On the left panel there's a built-in wine tools set you might find handy: corkscrew, foil cutter, pourer, and drip ring. If the unboxing matters as much as the wine, this one's for events, corporate gifting, and holiday promotions. Don't use it if you need to move dozens of bottles at once.

Two standard 750ml bottles fit. The compartments are sized for standard Bordeaux and Burgundy shapes, not oversized sparkling or magnum bottles.
A leather surface with orange finish. The exterior is textured leather in a bright orange with black trim, so it reads premium, not like a coated cardboard box.
Metal latch plus a leather handle. The latch keeps the lid closed during transport, and the handle holds a full load fine.
Wine tools included. You'll find a corkscrew, foil cutter, pourer, and drip ring in the left panel, held in place, not loose.
Brand or event customisation. Logos, text, and colours can be changed to match your theme, though orange is the default.

Get a Quote for this box More two-bottle wine boxes

Specifications

Category: Leather Wine Box
Bottles: 2

Customisation

You can change the leather colour, the trim colour, and the interior lining. Logo printing goes on the lid, the front panel, or both, with text debossed or foil stamped. If your bottle shape is unusual, we can adjust compartment dimensions and strap position, and the box size can work for smaller or larger formats. The wine tools set is removable or upgradeable. Just tell us your bottle sample or dimensions, your design reference, and your quantity.

How the box is built

The outer shell is leather, textured and finished in orange with black trim. It gives a soft hand feel and a bit of flex, since load-bearing durable cardboard sits under the leather to do the real work. A metal latch, not magnets, keeps the lid closed if the box gets bumped in a car or a display table.

Inside, there are dedicated compartments for two bottles with a strap across the top, which stops the bottles from lifting when you carry the box by the handle. Each wine tool gets its own slot in the left panel. The whole interior is lined to avoid scratching the glass. So it's built for carrying, not just sitting on a shelf.

Bottle fit and carrying

Bordeaux, Burgundy, and most still wine shapes sit down into the compartments, and the strap goes over the bottles, holding them against the base. Our insert tolerance stays tight at plus or minus 1 mm. In-house checks include a shake test with ten seconds of movement, then a 45-degree tilt to make sure the bottles don't slide, then an inversion to confirm the strap holds. These checks simulate how people actually handle it, so the bottles stay secure during transport and presentation. But if your bottle is unusually tall or has a wide shoulder, send us a sample and we'll check it before you commit.

Where this box fits

Gifting, events, corporate promotions: weddings, anniversaries, holiday parties, client gifts. The orange and black colour scheme is bold, which works when you want the packaging noticed. The included tools complete the gift. But this is not a shipping box. Don't put it in a courier van without an outer carton. Because the leather surface will scuff if handled roughly. Treat it as retail packaging, not transit packaging. For a single gift or a small batch of premium giveaways, it's solid.

Buyer questions

Will this box hold a Burgundy bottle with a wider shoulder?

Because the compartments are sized for standard 750ml shapes, most standard Burgundy bottles fit. But if your bottle's shoulder is unusually wide, the strap may not sit correctly. Send us your bottle sample or the shoulder diameter and height, and we'll verify the fit before you order.

Can the wine tools be removed or changed?

Yes. The left panel tool set is standard, but you can remove it entirely or swap in different tools. Some buyers want a higher-end corkscrew, others no tools at all to keep the box lighter. The panel slots, though, would need adjusting to match any changes.

Is the leather surface durable enough for shipping?

Remember, this isn't a shipping box. The leather scuffs if packed loose with other items, so put it in an outer carton with padding for any courier delivery. For hand delivery on the day, events, or retail display, the leather is fine because it's a presentation piece, not a transit case.